The 296.33-12 is an automatic trimming knife assembly (moving knife assembly) for overlockers/sergers. Its core function is to cooperate with the fixed knife to complete stitch trimming and thread end cleaning. It is compatible with Yamato HX8V and other series overlockers, ensuring neat thread ends after sewing and improving efficiency. Detailed introduction is as follows:
Core Functions
Automatic Thread Trimming and Thread End Control: Upon sewing completion or after backtacking, the electronic control triggers the high-speed oscillation of the moving knife. It precisely engages with the cutting surface of the fixed knife (e.g., 296.33-11) to cleanly cut both the upper and lower threads, maintaining stable and controllable thread end length (typically 2-5mm). It adapts to switching between thick and thin fabrics, preventing uncut threads, excessively long thread ends, or fabric fraying. Suitable for batch production scenarios like apparel and home textiles.
Stitch Finishing and Process Linkage: Synchronized with the machine's trimming sequence (e.g., linked with thread release and presser foot lift), the knife automatically resets after cutting. This ensures the next sewing cycle starts without interference, reduces manual trimming time, and improves assembly line efficiency. Ideal for automatic finishing after overlooking and seaming, guaranteeing consistent finished product appearance.
Thread Break Protection and Fault Prevention: The sharpness of the moving knife's blade and its precise oscillation angle minimize the risk of thread breakage or leftover thread tails due to insufficient cutting force. If abnormal thread jamming occurs, an overload protection mechanism in the moving knife assembly prevents mechanical damage, facilitating troubleshooting of feed or tension issues.
Compatibility with Multiple Stitch Types and Fabrics: Compatible with 2-thread, 3-thread, and 4-thread overlock stitches. The moving knife stroke can be adjusted to accommodate different thread counts and fabric thicknesses (e.g., chiffon, denim). Working in coordination with the needle plate and presser foot, it secures the fabric edge during cutting to prevent uneven trimming or fabric shifting.
Maintenance and Service Life Assurance: Modular design allows for quick replacement of the moving knife when the blade edge is worn, minimizing downtime. Regular cleaning and lubrication extend the assembly's service life and maintain stable cutting performance.
Operation and Maintenance Key Points
During installation, ensure a clearance of 0.01-0.03mm between the moving and fixed knives, with blade edges properly aligned to avoid poor cutting or abnormal noise.
Clean lint and thread debris from the knife surfaces daily. Inspect blade sharpness weekly; replace promptly when worn to prevent thread breaks or excessively long thread ends.
Adjust thread trimming timing parameters (e.g., trimming angle, speed) to suit different fabrics and stitch types, optimizing cutting results.
Avoid impact between the moving knife and hard objects to prevent chipping of the blade edge, which could affect cutting precision.
Hot Tags: serger trimming knife assembly, China serger trimming knife assembly manufacturers, suppliers, factory, Air Suction Device, other auxiliary devices, Serger Trimming Knife Assembly, Sewing Machine Handwheel, Sewing Machine Work Light Switch
